 |
 |
 |
 |
 |
 |
 |
 |
More
Etched
Plaque
Information
General
Borders on an etched plaque can refer to either the edges or corners in
addition to an actual etched border. In addition to square and rectangular
sizes, etched plaques can be machined and/or cut into a variety of shapes
to fit into almost any design environment.
Edges
|
|
Square
Edge The standard edge treatment on an etched plaque is a square edge (90°). |
|
|
Bevel
Edge An optional edge is a machine bevel. Our standard bevel is 45° and is applied to one half the material thickness. A bevel the full thickness of the material is not recommended due to sharp edges. Bevel edges on 1/16" thick metal are not available. |
Corners
 |
Square
Corners Square corners (90°) are standard unless otherwise specified on etched plaques. |
 |
Radius
Corners Radius corners are optional on all etched plaques. Please specify radius required. |
Shapes
Square or rectangular shapes are standard on etchings. However, optional
oval, round or other shapes can be produced.
 |
 |
 |
 |
