 |
 |
 |
 |
 |
 |
 |
 |
More
Cast
Letters
Information
General
Cast letters are manufactured using sand molds in our state-of-the-art
foundry from raw ingot alloyed in the following materials:
Cast
Bronze
Equivalent to Copper Development Association Alloy C92200;
88% copper, 6% tin, 4% zinc, 2% lead.
Yellow
Brass
Alloy # 406; 58% copper, 40% zinc,
less than 1 % each tin and lead.
Aluminum
-
Satin or Baked Enamel Finishes
Cast from Aluminum Association Alloy Designation C443.2.
Aluminum
- Anodized Finishes
Cast from Aluminum Association Alloy Designation A514.2.
Helpful Hints
- Both
cast bronze and cast brass letters are protected with a clear protective
coating prior to shipping, however, cast brass is not recommended for
exterior use.
- Although casting alloys of aluminum can be anodized, because of the inherent nature of the sand casting process, an anodized finish is not recommended for cast products.
