More
Tag
Information

General
Nick and Notch tags allow end users to efficiently batch-print tags as needed. We supply them in a coil format with 9.5” cores for use in both manual-feed and auto-feed machines. Scored (nicked) tags can be separated into individual tags after printing the graphics. Rounded (notched) corners minimize hazards and dog-eared edges.

	Uses
	Label raw materials Record and track work in progress Identify finished goods

Materials

• .008” Aluminum in 2”, 2-1/2”, 3” widths
• .013” Aluminum in 2-1/2” width
• .017” Aluminum in 3” width
• .008” Electrogalvanized Steel in 2”, 2-1/2” & 3” widths
• .012” Electrogalvanized Steel in 7/8”
• .015” Cold-Rolled Steel in 7/8” width
• .008” Tinplate in 2-1/2” & 3” widths
• .008” White Enamel Coated Steel in 2”, 2-1/2” & 3” widths
• Verify availability of the following:
  • .008” Stainless Steel in 3” width
  • .008” Enamel Coated Steel in 2” and 3” widths in these colors: Red, Orange, Yellow, Green, Blue, Purple, Brown or Black

Custom sizes and materials available by quotation.

Sizes

• Lengths adjustable from 1” to 7“ in increments of 1/2”
• Widths listed with materials

Holes

• 1 or 2 end holes or strapping slots
• Round hole sizes: 1/8”, 3/16”, 1/4”, 5/16”, or 3/8”
• Slotted holes sizes: 13/16” x 1/4”, 1-3/8” x 1/4”
  or 1-1/2” x 13/16”

Graphics
When advanced labeling is impractical, order blank tags. On-site printing by end user may include laser engraving, embossing or screen printing. If fixed wording is known at time of order, specify Embossed (raised) letters. Consecutive numbers, up to 6 digits, 3/8” high, are available. Company logos and special graphics available by quotation.